Cr10 3d printer clone final upgrade

If you are returning user, I know somehow you may say that I keep upgrading the design. This time is a final upgrade, the reason for that is this upgrade is a successful and a perfect build.
after failing many times. I find a facebook group which has all the parts but for me, I need the gantry STL parts.

Cr10 3d printer clone final upgrade

Therefore, I order the lead screw and a stepper motor and the aluminum profiles.
as I am using most of the parts from the previous build all my aluminum profiles are 2020.

this is the front photo I forgot to take the picture of the parts alone. although the printer is all good.
I am still struggling with the firmware because the printer is printing fliped/vertical. I have asked for help but so far I couldn’t find any solution.

If you need those Stl join the facebook group to get it because I am not the designer.
I have printed a screw and a bolt and also a benchy for the test. the print was very good I am really impressed with the quality of how Benchy was printed. just apert from flipped writing.
Support Me
The reason to write this kind of articles is not only to tell people what I am doing but also at the same time other newbies can look at it. and learn from my mistake or the way I am doing this 3d printing stuff.

hope will find the solution soon or if you know please let me know in the comment below.
this is what I wanted to share here.

One thought on “Cr10 3d printer clone final upgrade

  1. An intriguing discussion is worth comment. There’s no doubt that that
    you need to publish more about this issue, it might not be a taboo subject
    but typically people do not discuss such topics. To the next!
    Best wishes!!

Leave a Reply